MAXTITE Counter Top Support Braces provide an effective, safe, and visually appealing way to reinforce countertop and bar ledges. Protect your countertop from cracking, tipping, and breakage! This modern style replaces the use of corbels and the concealed support results in a clean floating appearance.
Installation Instructions (PDF)
These steel brackets replace corbels on a variety of materials including:
- Quartz
- Granite
- Quartzite
- Concrete
- Onyx
- Limestone
- Marble
- Soapstone
- Butcher Block
- and more!
MAXTITE Counter Top Support Brackets are designed to be placed between 18"-24" apart. To accommodate the most common installations, we've packed the counter top support braces in sets of 3 plus 12qty 2" screws.
It's everything fabricators, countertop installers, or homeowners need to easily and securely reinforce or mount a wide range of countertop types.
These brackets are crafted from one piece of solid steel free of welds, joins, or weak spots.
12 2" wood screws are included with this set of 3 stone support braces. This gives you 4 screws per counter top brace bracket. Each set of 3 countertop support braces are shrink wrapped with the screws for convenience. This allows the installer to grab a set and take it to the install without scratching the braces or the braces sliding around in the truck, and not having to remember to grab the screws. Simply take into the kitchen, open the pack, and everything is provided for a quick, scratch free install.
Each Countertop Support Brace bracket is predrilled with 6 countersunk holes so that the screws will finish flush with the support brace and powder coated gloss black for a high-end black polished finish. One edge of the counter top brace is flat and the other end is back-beveled with slightly rounded corners. This eliminates sharp edges for the homeowner to scratch or cut themselves, and the bevel provides a smooth transition from the bracket to the stone.
MAXTITE manufacturers brackets with full 1/4" thick counter top brace bracket. Competitor's 3/16" brackets are just too flimsy and allows too much flex in the brace. However, the 1/4" thick counter top bracket provides a solid stiff bracket that will fully support the overhang without flexing.
MAXTITE Counter Top Support Brackets are 2 1/2" wide to provide plenty of structural support. When placed at seams it gives a full 1 1/4" wide support on each piece of stone.
How to pick the correct size: Stay back 2-4 inches from the edge of the overhang, and add the width of the support wall you're attaching the bracket to.