HYDRO BARRIER is a thin, load bearing, self curing liquid rubber polymer which can be easily applied to form a flexible seamless waterproof/anti-fracture membrane. HYDRO BARRIER can be used on interior and exterior, horizontal or vertical surfaces and is approved by IAPMO for use as shower pan liner.
Features & Benefits
Allows for flood testing in 24 hours.*
Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured.
Changes in color from a light blue to darker blue when cured.
Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks.
“Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test).
Exceeds ANSI A118.10 and A118.12.
Fast curing; allows foot traffic in 4–6 hours @ 70°F (21°C), 50% RH.
Lighter color for ease of inspection.
Safe—no solvents and non-flammable.
Install tile, brick and stone directly onto membrane.
* When cured 70°F (21°C) or higher at 50% RH lower temperature at higher RH will require long cure times.
HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners. HYRO BAN is a single component self-curing liquid...
HYDRO BAN Adhesive & Sealant is a one component, fast curing, hybrid elastomeric adhesive and sealant. This product is specifically formulated to meet today’s Green Building Standards and has...
HYDRO BAN Quick Cure is a rapid, thin, liquid applied ready-to-use waterproofing membrane that is ANSI A118.10 Compliant. Featuring wet-cure technology, this allows curing even in humid, cold and...
HYDRO BAN Drain Grates are low profile floor drains specifically designed for use with the HYDRO BAN Pre-Sloped Shower Pan. The HYDRO BAN Drain Grate can also be used in other areas requiring...
