HYDRO BAN Quick Cure is a rapid, thin, liquid applied ready-to-use waterproofing membrane that is ANSI A118.10 Compliant. Featuring wet-cure technology, this allows curing even in humid, cold and damp environments. Quick Cure allows for flood testing within 30 minutes allowing contractors to install a shower system all in one day. Designed for both commercial and residential tile installations. Suited for interior substrates, Quick Cure creates a continuous waterproofing barrier with outstanding adhesion. It bonds directly to metal, PVC, stainless steel and ABS drain assemblies.
Features & Benefits
Can be used in humid, cold and damp environments.
Allows for flood testing in 30 min. at 70°F (21°C) or higher¥
Allows for crack isolation up to 1/16” when applied at 30 mils thick, anything over will require the use of fabric within any cove, corner, movement joint and other areas of transition
Bonds directly to metal, PVC and ABS plumbing fixtures only
HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners. HYRO BAN is a single component self-curing liquid...
HYDRO BAN Drain Grates are low profile floor drains specifically designed for use with the HYDRO BAN Pre-Sloped Shower Pan. The HYDRO BAN Drain Grate can also be used in other areas requiring...
HYDRO BAN Preformed Curb is made from high-density expanded polystyrene with a liquid waterproof membrane coating applied to it. HYDRO BAN Preformed Curb is lightweight and ready-to-tile. Materials:...
HYDRO BAN Adhesive & Sealant is a one component, fast curing, hybrid elastomeric adhesive and sealant. This product is specifically formulated to meet today’s Green Building Standards and has...
HYDRO BAN Sheet Membrane is a waterproof sheet membrane that is installed using a substrate appropriate LATICRETE® thin-set. Due to its polymeric construction, HYDRO BAN Sheet Membrane can also...
