HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners. HYRO BAN is a single component self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. HYDRO BAN bonds directly to a wide variety of substrates.
Features & Benefits
Allow for flood testing in 2 hours at 70°F (21°C) or higher (Refer to cautions section for more information on curing)
Does not require the use of fabric (For gaps 1/8" (3 mm) or less see DS 663.5 for complete instructions)
Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured
Bonds directly to metal
PVC and ABS plumbing fixtures only
Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
“Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
Changes in color from a light sage to an olive green when cured
Equipped with anti-microbial technology to protect the treated article.
HYDRO BAN Drain Grates are low profile floor drains specifically designed for use with the HYDRO BAN Pre-Sloped Shower Pan. The HYDRO BAN Drain Grate can also be used in other areas requiring...
HYDRO BAN Preformed Curb is made from high-density expanded polystyrene with a liquid waterproof membrane coating applied to it. HYDRO BAN Preformed Curb is lightweight and ready-to-tile. Materials:...
HYDRO BAN Adhesive & Sealant is a one component, fast curing, hybrid elastomeric adhesive and sealant. This product is specifically formulated to meet today’s Green Building Standards and has...
HYDRO BAN Quick Cure is a rapid, thin, liquid applied ready-to-use waterproofing membrane that is ANSI A118.10 Compliant. Featuring wet-cure technology, this allows curing even in humid, cold and...
