FRACTURE BAN SC is a thin, load bearing, self-curing liquid rubber polymer that can be easily applied in a single coat to form a flexible seamless anti-fracture membrane. FRACTURE BAN SC can be used on interior and exterior, horizontal applications. FRACTURE BAN SC meets ANSI A118.12 requirements and prevents nonstructural, inplane floor cracks up to1/8" (3 mm) from transferring through grout, ceramic tile and stone.
Features & Benefits
Does not require the use of fabric
Changes in color from a light blue to darker blue when cured
Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured
Exceeds ANSI A118.12
Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
“Extra Heavy Service” rating per TCNA performance levels (ASTM C627 Robinson Floor Test)
Equipped with anti-microbial technology
Rapid drying for a faster time to tile
Install tile, brick and stone directly onto membrane
A high performance, pliable, light weight peel and stick membrane designed for use under thin-bed adhesives for ceramic tile, stone and other hard surface installations. This reinforced high strength...
FRACTURE BAN Primer is a concentrated premium quality, water-based primer designed to be applied prior to the installation of FRACTURE BAN Membrane. FRACTURE BAN Primer penetrates deeply into...
HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners. HYRO BAN is a single component self-curing liquid...
HYDRO BAN Drain Grates are low profile floor drains specifically designed for use with the HYDRO BAN Pre-Sloped Shower Pan. The HYDRO BAN Drain Grate can also be used in other areas requiring...
HYDRO BAN Preformed Curb is made from high-density expanded polystyrene with a liquid waterproof membrane coating applied to it. HYDRO BAN Preformed Curb is lightweight and ready-to-tile. Materials:...
