POWER RAIZOR for 45°/90°/180° cuts

45°/90°/180° MULTI-ANGLE CUTTING UNIT FOR RAIZOR

Art. 433PWR (angle grinder not included)

• Multi-angle cutting unit to be used in combination with the RAIZOR cutting guide.
• It performs cuts with the following angles: 45° (“jolly”, miter cut), 90° (standard/vertical cut), 180° (lateral incision – kerf/slots along the side of the tile/slab, and/or side shaping – 1/2 bullnose).
• Tilting movement (plunge cut) to adjust the depth of cut, to perform square and rectangular holes and to make cuts in multiple passes.
• Available without angle grinder.
• Suitable with the most popular brands and models of angle grinders.
• Available in 2 different versions to suit the following angle grinder arbor sizes: M14 (metric) or 5/8”-11 (imperial).
• Dry use (standard version) or wet use (to perform wet cut in combination with Kit for wet cut and dust suppression – Art. 433PWW A, Power Raizor must be equipped with cordless/battery operated angle grinder or corded model having rating IP54 or any higher).
• Includes connecting port for connection either to dust extractor or to Kit for wet cut and dust suppression (Art.433PWW A).
• Cutting depth (thickness): 20 mm (0.78”) at 90°, 16 mm (0.63”) at 45° and 180°.

DUST SUPPRESSION DEVICE WITH WATER

Art. 433PWW A

• Wet cooling device to be used in combination with POWER RAIZOR and BC45.
• Blade cooling with water grants:
  1) Complete suppression of dust;
  2) Better cut finishing;
  3) Quicker cut.
• Both adjustments onto tap and onto spraying nozzle allow a perfect cooling with a minimal amount of water.
• To be used only in combination with cordless (battery operated) angle ginders and/or corded models having rating
  IP 54 or any higher.
• Can be used with any cutting position/angle (45°/90°/180°) .
• Carrytank capacity of 8 litres (1,75 gal) with relief valve.

DUST CONTAINMENT DEVICE

Art. 433PWZP A

• Dust containment device to be used in combination with POWER RAIZOR cutting unit.
• Used in combination with a proper aspirator, it allows to radically reduce the amount of dust on the environment while dry cut is performed.
• The device can be used onto POWER RAIZOR equipped with any kind of angle grinder.
• Adjustable according with slab thickness.
• Can be used for 45° miter cut and 90° straight cut.