V-MAX SV-9 Vinyl-Ester Knife Grade Stone Adhesive

V-MAX adhesives are very light / white (pearlescent) in color making them ideal for invisible joints, especially on light/white colored stones. Perfect for seaming, laminating and chip repair on all types of natural and engineered stone. These adhesives are 100% Vinyl Ester stone adhesives formulated with the most exclusive, premium resin available. They provide the strongest bonds of all Vinyl Ester adhesives in the stone industry.

V-MAX adhesives are very light in color and the most translucent (nearly transparent) Vinyl Ester adhesive from “CAN-TO-CURE”.

• Consistency: SV-9 Thick Paste
• Mix Ratio: 1% – 3% BPO
• Gel Time: 3 – 4 minutes
• Cure Time: 20 minutes
• Shelf Life: SV-9 / 6 mos.
• Location: Indoor
• Use With: Natural and Engineered Stones
• SV-9 Uses: Seaming, Laminating, Miter Joints, Crack Repair, Chip Repair

Be sure to TEST each substrate for bonding and appearance prior to the actual application.

Use: To achieve the best results, the contact surfaces must be thoroughly cleaned and dried. Before adding the hardener, the resin may be tinted with Superior Coloring Paste to match the color of the stone. The resin is then thoroughly mixed with no more than 1%-3% of the white paste hardener (BPO) by weight. At a temperature of 70°F (21°C), the mixture stays workable for 4-6 minutes. Higher temperatures shorten the working time and lower temperatures extend the working time. After 20 minutes, the adhesive is fully cured and work can continue with the stone. For white marble, be sure to test for shadowing and color match prior to application. For indoor applications only.

Storage: Store indoors at room temperature. Do NOT store above 75°F (24°C). High heat and cold temperatures will adversely affect the shelf life. Avoid storage in direct sunlight and where freeze/thaw conditions may exist.