Superior GOLD is a revolutionary and unique adhesive perfectly suited for use on nearly all stone surfaces…
– Natural Stone including granite, marble, slate, quartzite, sandstone, onyx and more!
– Quartz Surface including Caesarstone®, Silestone®, Cambria® and more!
– Solid Surface including Corian®, Formica®, Wilsonart® and more!
– Sintered Stone including Dekton®, Neolith®, Lapitec® and more!
ALL‐IN‐ONE!
Superior GOLD is very light / white (pearlescent) in color making it ideal for invisible joints, especially on light/white colored stones. Perfect for seaming, laminating and chip repair on all types of natural and engineered stone. It is cured with only 1%‐2% white paste hardener (BPO). This cutting edge resin technology even outperforms epoxy systems by curing in less than 20 minutes. You may hear our competitors say they have a product “just like GOLD” but this adhesive has no equal.
Superior GOLD provides excellent mechanical & chemical bonding making it ideal for use when stone is being processed with CNC machines. The cured adhesive is tough and can absorb freeze/thaw conditions and shock‐loads which is important during transportation of bonded pieces.
Superior GOLD is very low in color making it easy to color with Superior Coloring Paste or simply use it as‐is to pick up the natural colors of the stone.
- Knife Grade Consistency: Paste
- Mix Ratio: 1% – 2% BPO
- Gel Time: 4-6 minutes
- Cure Time: Under 20 minutes
- Shelf Life: 1 year
- Location: Indoor AND Outdoor
- Use With: Natural & Engineered Stone
- Recommended Use: Laminating, Seaming, Rodding, Stone Repair
Be sure to TEST each substrate for bonding and appearance prior to the actual application.
Use: To achieve the best results, the contact surfaces must be thoroughly cleaned and dried. Before adding the hardener, the resin may be tinted with Superior Coloring Paste to match the color of the stone. The resin is then thoroughly mixed with no more than 1%-2% of the white paste hardener (BPO) by weight. At a temperature of 70°F (21°C), the mixture stays workable for 7-9 minutes. Higher temperatures shorten the working time and lower temperatures extend the working time. After 20 minutes, the adhesive is fully cured and work can continue with the stone. Can be used for both indoor and outdoor applications. Do NOT store above 75°F (24°C).
Storage: Store indoors at room temperature. Do NOT store above 75°F (24°C). High heat and cold temperatures will adversely affect the shelf life. Avoid storage in direct sunlight and where freeze/thaw conditions may exist.