Color-Tinted Polyester Knife Grade Adhesive

Superior Polyester FILLED Adhesives are excellent for filling stones that have small scratches, cracks, chips and holes. We have pre‐colored these adhesives to match the most common stone colors to save you the time and hassle of mixing the colors yourself.We have also “filled” these adhesives with calcium carbonate which allows the cured adhesive to be polished to the same finish as the stone creating an invisible repair. Cured with 2%‐4% white paste hardener (BPO), these adhesives have a gel time of 3‐5 minutes and are fully cured in less than 20 minutes. Proper storage in a climate controlled room prolongs shelf life. An excellent choice for indoor applications. Knife Grade Consistency: Thick Paste

• Mix Ratio: 2% – 4% BPO
• Gel Time: 3 -5 minutes
• Cure Time: 20 minutes
• Shelf Life: 1 year
• Location: Indoor
• Use With: Natural & Engineered Porous Stone Knife Grade
• Uses: Seaming, Crack / Chip Repair Be sure to TEST each substrate for bonding and appearance prior to the actual application.

Use: To achieve the best results, the contact surfaces must be thoroughly cleaned and dried. Before adding the hardener, the resin may be tinted with Superior Coloring Paste to match the color of the stone. The resin is then thoroughly mixed with 2%-4% of the white paste hardener (BPO) by weight. At a temperature of 70°F (21°C), the mixture stays workable for 4-6 minutes. Higher temperatures shorten the working time and lower temperatures extend the working time. After 20-30 minutes, the adhesive is fully cured and work can continue with the stone. For indoor use only. Do NOT store above 75°F (24°C). Storage: Store indoors at room temperature. Do NOT store above 75°F (24°C). High heat and cold temperatures will adversely affect the shelf life. Avoid storage in direct sunlight and where freeze/thaw conditions may exist.